Specifications include, but are not limited to: A. Supplier shall provide dry polymers for City’s Public Utilities Water Reclamation Facility on an “as needed” basis for the Waste Activated Sludge Thickening Process. B. Supplier shall be responsible for stocking and inventorying sufficient quantities of all products under this Agreement in order to guarantee that all orders placed against the contract be delivered complete and to the designated site(s) within the delivery time period. C. Supplier warrants that products furnished conform to the requirements specified and are of good merchantable quality and suitable for the purpose intended. Supplier may only submit polymers produced in their own plant and shipped in the original container. Blended or repackaged products of another company’s manufacture will not be accepted. D. Suppliers shall provide water treatment emulsion polymers that can be injected directly into the solids stream for dewatering to the new facility for City's Public Utilities Water Reclamation. E. Products for drinking water plants. Supplier shall provide Cationic polymer product for City’s Big Cottonwood and Parleys drinking water plants and shall be subject to the same instructions, terms, and conditions for orders and deliveries as described in Section III. F. Supplier shall provide anti-scalant polymer product for the Water Reclamation Facility and shall be subject to the same instructions, terms, and conditions for orders and deliveries as described in Section III. G. Supplier shall provide dewatering system. H. Supplier shall provide parts to keep emulsion polymer products such as unit electrical components and unit mechanical components.