Specifications include, but are not limited to: Short Mountain Golf Sand (or approved equal that meets specifications); Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly, and the successful bidder shall be required to deliver the brand/specification stated in the solicitation. Particles retained on the #18 (1mm) sieve must be greater than 2%. Particles retained on the #35 (0.50mm) sieve must be greater than 32%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 100 Tons; 70/30 Dried Sand - Dale Hollow Lake SRP; Short Mountain 70/30 Dried Sand (or approved equal that meets specifications); Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly, and the successful bidder shall be required to deliver the brand/specification stated in the solicitation. Must be kiln dried material. Particles retained on the #18 (1mm) sieve must be between 4-6%. Particles retained on the #35 (0.50mm) sieve must be between 40-50%. Particles retained on the #60 (0.25mm) sieve must be between 45-55%. Particles retained on the #270 (0.05mm) sieve must be less than 1%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 25 Tons; Fine Sand - Kentucky Dam Village SRP Pine Bluff Materials "Fine Sand" (or approved equal that meets specifications) Bidders who propose alternate brands/specifications should enclose descriptive literature with their bids so that the equality can be verified. Failure to enclose sufficient literature may result in a non-responsive bid. If the brands are not changed, the contract will be written accordingly, and the successful bidder shall be required to deliver the brand/specification stated in the solicitation. . Particles retained on the #16 (1.18mm) sieve must be less than 2%. Particles retained on the #30 (0.60mm) sieve must be between 7-8%. Particles retained on the #50 (0.30mm) sieve must be between 50-52%. Must provide products specification sheet (particle sieve distribution) with bid for this item. Quantity: 50 Tons