Specifications include, but are not limited to: The South Carolina Department of Transportation (SCDOT) is soliciting sealed bids from interested companies to supply bridge pile jackets in various sizes. The pile jackets will be used to structurally restore and protect concrete, timber, and steel piles in combination with either epoxy or cement based grout to create an encapsulated structural repair. Jackets will be used for pile splicing / extensions, pile repairs and various other bridge / marine applications. The Pile jackets shall be non-corrosive with abrasion and impact resistance. Jackets must also be suitable for saltwater marine applications. Jackets must be durable to withstand freeze-thaw environments. These materials will be provided to SCDOT Bridge Maintenance Units throughout the state. SCOPE OF WORK/SPECIFICATIONS 1. The bridge pile jackets shall be custom fabricated fiberglass jackets manufactured from Fiberglass Reinforced Plastic (FRP) and polyester resins. The material shall be UV resistant. 2. Jackets shall have the ability to be installed with no dewatering or disassembly of the structure in order to apply the jacket. 3. Jackets shall be available in various lengths and range in inside diameter (ID) from 20” to 60”. The following lengths are specified within the bidding schedule in Section VIII: a. 20” ID b. 24” ID c. 36” ID d. 48” ID e. 60” ID 4. Pile jackets shall be translucent in color. 5. Jackets must meet engineering specifications to withstand hostile marine environments. The following specifications and ASTM standards shall apply: a. Minimum ultimate tensile strength of 16,000 psi (110 MPa) as per ASTM D638. b. Minimum Ultimate Flexural strength of 25,000 psi (172 MPs) as per ASTM D790 c. Flexural Modulus of Elasticity of 800,000 psi (5,516 MPa) as per ASTM D790 d. Barcol Harness of 45 min as per ASTM D2583 e. IZOD Impact (notched) of 20 ft-lbf/inch (.04 J/m) f. Maximum Water Absorption of less than 1% as per ASTM D570 g. Relative Permittivity @ 60 Hz 4.40 as per ASTM D150 6. The Contractor shall deliver the materials to the specified address on each submitted purchase order.