Specifications include, but are not limited to: Basic Service scope of work is to be performed as stated below and provided on scheduled visits. A. Lubricating System 1. Perform oil analysis and submit a report annually. 2. Change oil and filters annually 3. Lubricate all fittings. 4. Check and report all leaks. B. Fuel System 1. Change fuel filter elements. 2. Check generator sets for fuel leaks. 3. Adjust and clean injectors annually. 4. Check float switch on day tank. 5. Check operation of fuel transfer pump and check for leaks. C. Cooling System (annual service) 1. Check for leakage. 2. Bring coolant capability to -30F. Add Owner provided coolant as required. 3. Drain and flush cooling system in August of each year. 4. Inspect cooling system hoses. 5. Service and replace, if required, drive belts and adjust tension. 6. Check condition and operation of a remote radiator if so equipped 7. Pressure test radiator annually. 8. Record engine cooling temperatures under a load and without a load. D. Air System (annual service) 1. Service air cleaner and replace filters. 2. Check air intakes, outlets and clean.