Specifications include, but are not limited to: Complete Welding Truck, with: Conventional Cab, Dual Rear Wheel Chassis, with installed Welder Body, work tail bench and a pedestal mounted truck crane. 19,500 lb. GVWR capacity. Complete and assembled, with a Mounted selfcontained, Engine driven, Welder/Generator and an Air Compressor. BODY STYLE: Full sized Conventional Regular Cab, Truck, Utility Body, 4X2, 19,500 lbs. GVWR MAXIMUM, Dual Rear Wheel. The truck is to be equipped with factory installed Towing Package include front stabilizer bar, 7-round pin, wire trailer harness, electric trailer brake controller, wiring kit, increased cooling, suspension, and electrical capacities. Minimum towing capacity 12,000Lbs. Wheelbase shall be 145 inches. Minimum. Cab to Axle Dimension: 60 inches Minimum. ENGINE: Gasoline Powered, 7.3L. 335 HP @ 3,700 RPM. and 470 ft-lb. 3,750 RPM. MINIMUM Factory installed engine oil cooler. Engine supplied shall be ORVR CARB certified as being ULEV compliant with all applicable state of California and Federal regulations. ELECTRICAL: 12-Volt, negative ground Electrical system. Three (3) Maintenance Free Batteries 750 CCA. Wiring shall be fuse or Circuit Breaker protected. Alternator: 250 Amps.