Metal Building based on the criteria below or equivalent: 3’ Wainscot around the building Size = 30’ wide by 50’ deep x 12’ height 3’ x 3’ cupola Roof 12-gauge metal Trusses are 4/12 pitch on 5’ centers Metal panels = 26-gauge metal Roll-up door – 10’ tall x 12’ wide, installed Wind load = 135 MPH, 3 second gust load, 115 sustained wind load Walk through door = 36” wide Walk through door to be located on left side of the roll up door Enclosed all sides One foot overhang on all sides and ends Fully insulate main structure with double foil/ vinyl installation 4” 3500psi reinforced concrete slab with moisture barrier and gravel Main structure includes 3’ apron in front of building and stub in for electric Project includes excavation and leveling of the site Frame posts will consist of CCA 6”x6” pressure treated posts on 10’ centers Colors to be determined by the Town Project includes labor to construct building and concrete slab. Concrete Slab minimum requirements: - Prepare ground surface for a 30’ by 50’ concrete slab with foundation per detail below. - Install 4” thick compacted aggregate base (303-01) Minimum 97% standard proctor density mineral aggregate, Grading D. - Install 4” thick 3500 psi concrete at 28 days with rebar and wire mesh as shown in detail below. - 3’Apron on front of building