Specifications include, but are not limited to: Executive (per Appendix A) Remove old network cables from old workstations. Reuse/add network for new workstations. Fix whip by #548. The whip needs to be flatter against the column as it is a tripping hazard. 501 Conference Room (per Appendix B) Add recessed network and power behind monitor. Includes 2 duplex and 2 network jacks. Add network and power from wall to table in flat floor raceway. 300 Area (per Appendix C) Pull network from old workstation. Reuse/add network for new workstations. Add recessed network and power behind monitors in #316 and #317. Add network and power along window wall. Three sets. FE Area (per Appendix D) Add power in room #200 to west, south, and east wall. HR Area (per Appendix E) Add power to west wall near entrance (area #401) Lunchroom (per Appendix F) Add power to the northwest wall. Total of three with a height of 32” each. This will be completed once new furniture is installed so outlets are centered with the tables. Add 110 panel in MDF room and East IDF Room. Cat6/Cat6e network cable Coordinate schedule with Jennifer Behrendt.