Specifications include, but are not limited to: Electric energy efficient, energy star rated washers and dryers shall be installed. Washers shall be as indicated in Schedule A - front load, minimum three cycle selection; regular, perma press and delicate two (2) speed wash and spin action for true delicate operation. All washers shall have factory set cold rinse. All washers shall be set up for cold water temperature selection only. All machines shall have an emergency safety switch to stop washer when door is open. It is desired to have battery back-up to protect all programmed information for life. It is desired that machines have built in self-diagnostics to quickly identify problem areas. Self-diagnostics shall be activated manually or by using the handheld device. Cycle programmability shall be factory set at thirty-five (35) minutes to allow longer extraction time, plus fill and programmable to customize wash and spin cycles for a minimum laundry load capacity of fourteen (14) pounds. Electric dryers load capacity shall be a minimum UL listing of eighteen (18) pounds. Cycles shall consist of four cycles, regular, perma-press, delicate, and air fluff. Factory shall set cycle programmability at sixty (60) minutes and programmable from one (1) minute to sixty (60) minutes. Both heat and cool down cycle temperatures shall be programmable. All machines shall have a programmable top off feature which allows user to add more time increments for ten (10) minutes of additional drying time. The University prefers washers and dryers be computerized which interact with the user, count cycles, and be selfdiagnostic for faster repair service.