Specifications include, but are not limited to: The purpose of this Request for Proposal (RFP) is to seek proposals from qualified firms to provide line jetting services to serve restaurants, food service establishments, and other industries that are members of the Tempe Grease Cooperative (TGC). To ensure that the City fulfills current and future obligations, the City reserves the right to award contracts to multiple firms. The actual utilization of any contract will be at the sole discretion of the City. The fact that the City may make multiple awards should be taken into consideration by each Offeror. The City anticipates awarding contracts to 3 to 5 firms to provide line jetting services. The following requirements have been identified as mandatory minimums for this procurement. Firms that do not meet any or all of these mandatory minimums will be deemed non-susceptible and removed from the evaluation process. The Proposer must be licensed to do business in the State of Arizona. The Proposer must have equipment and trained staff necessary to effectively hydro-jet up to 200 feet of private sewer service line up to 4” in diameter. Minimum Qualifications of the Staff Liquid waste vehicle operators must obtain and maintain required commercial driver’s license. Proposer's managing employees should have a minimum of five years of experience performing industrial vacuum cleaning and jetting services Preparation Phase: Inspect the site to identify access points and potential obstacles. Notify the client of any pre-service requirements, such as clearing access pathways or shutting off water supply if necessary. Gather all necessary equipment and tools for the job, including safety gear. Safety Precautions: Ensure all team members are wearing appropriate personal protective equipment (PPE), including goggles, gloves, and protective clothing. Secure the work area with warning signs or barriers to prevent unauthorized access. Verify that all equipment is in proper working condition before beginning the job. Equipment Setup: Set up the high-pressure jetting equipment at the designated access point. Connect hoses securely to the water supply and jetting machine. Adjust pressure settings on the jetting machine according to the requirements of the job.
