Specifications include, but are not limited to: To describe, 25 TON TRAILER, conforming to the following features and specifications. General design to be a Flat Deck, Beaver Tail with loading ramps trailer, and a Pintle Ring Adjustable Hitch Coupler. Deck is to be flush for forklift loading of cargo. Tie-down anchor points configuration to be per specification and include load ratings calculated by a Professional Engineer. Configuration: Pintle coupled, a Three (3) Axle, Deck over wheels, Equipment transport trailer. Configured for both wheeled and tracked off road equipment. A three (3) Axle, 62,000 lb. Beaver Tail, power assisted, hydraulic over air Loading ramps trailer configuration, and a trailer tongue mounted Pintle Ring Adjustable Hitch coupler, with (2) two speed hand crank retractable leg landing gear. A 9-inch Forward bump stop barrier, steel fabricated to serve as a wheel-bump-stop. CAPACITY AND DIMENSIONS: G.V.W.R.: 61,000 lbs. at 55 M.P.H. minimum. PAYLOAD CAPACITY: 54,000 lbs. at 55 M.P.H. minimum. TRAILER WEIGHT: Approximately 11,000 lbs. HITCH WEIGHT: 8,000 lbs. required at Maximum payload capacity. Any reduction of the payload below the maximum may reduce the required hitch weight. OVERALL LENGTH: Minimum 34 feet 2 inches (including ramp overhang). OVERALL WIDTH: Minimum 102 inches.
