Specifications include, but are not limited to: 1. Cab & Chassis 1.1. GVWR: 35,000 lbs. 1.2. Frame: Heat treated alloy steel, 120,000 PSI yield strength, 480.0” Maximum OAL 1.2.1. Front frame extension 20” in front of grille (see image below). 1.3. Cab & Axle Positions 1.3.1. Axle configuration 4x4 1.3.2. Cab to axle (CA): 109.10” clear* 1.3.3. Center of axle to end of frame (AF): 45”* *Values given here are minimums. The space between cab and body/outriggers shall not exceed 10 inches. Truck vendor and service body manufacturer/upfitter shall coordinate in selecting a cab to axle dimension that works with the specified body. The required AF must be achieved with factory frame rails. Frame extensions to meet the required AF are not allowed. The AF must be sufficient to allow support of the full length of the body. 1.4. Cab 1.4.1. Conventional 6‐man, crew cab 1.4.2. Tinted safety glass 1.4.3. Full width exterior cab mounted sun shade with integral clearance lights 1.4.4. Cab entry handles, driver & passenger side 1.4.5. Outside mirrors, driver & passenger side 1.4.5.1. Power adjustable 1.4.5.2. 90 sq. in. minimum 1.4.5.3. Heated with integrated turn signals 1.4.5.4. Two (2) adjustable spot mirrors, one (1) per outside mirror 1.4.6. Two (2) roof mounted air horns & one (1) standard electric horn 1.4.7. Air ride: driver and passenger seat, cab suspension 1.4.8. Manufacturer’s highest level sound insulation package 1.4.9. Wing dash, if available 1.4.10. Gauge package including the following gauges: 1.4.10.1. Air cleaner restriction 1.4.10.2. Coolant temperature 1.4.10.3. DEF 1.4.10.4. Fuel 1.4.10.5. Oil pressure 1.4.10.6. Primary and secondary air pressure 1.4.10.7. Speedometer 1.4.10.8. Tachometer 1.4.10.9. Voltmeter 1.4.10.10. Gear indicator 1.4.10.11. Odometer 1.4.10.12. Total engine hours 1.4.10.13. Trip hours 1.4.10.14. Trip odometer 1.4.10.15. Auto transmission oil temperature 1.4.10.16. Engine oil temperature 1.4.11. Dual sun visors 1.4.12. Two (2) cup holders, integral to dash 1.4.13. 3‐point seat belt for each seat. All seat belt webbing must be manufacturer’s high visibility color (Orange, Red, Green, or Yellow). 1.4.14. Climate control, including air conditioning, heater, & defroster 1.4.15. Power windows & power door locks 1.4.16. Tilting steering wheel...
