Specifications include, but are not limited to: The Contractor shall furnish all labor, equipment, material, supplies, signage, traffic control, and other incidentals necessary to provide a Slurry Seal. Slurry Seal shall consist of a mixture of an approved Polymer Modified emulsified asphalt, mineral aggregate, water, and specified additives, proportioned, mixed and uniformly spread over a properly prepared asphalt surface. The completed Slurry Seal shall leave a homogeneous mat, adhere firmly to the prepared surface, and have a skid-resistant surface texture throughout its service life. -The polymer-modified emulsion asphalt for slurry seal shall be a Quick Setting type CQS-I HP (Polymer Modified, Cationic Quick Set) the specification for Slurry Emulsion is in accordance with the material properties and test methods as specified by ISSA and AASHTO. Polymer may separate from the emulsion due to the differences in density. If separation occurs, the latex must be remixed into the emulsion by circulation in the tanker before the modified emulsion is transferred to the slurry machine for application.
