Specifications include, but are not limited to: Contract Item 1 – Thermal Transfer Garment Label Printer 3.1.1.1 Vendor must provide an estimated quantity of three (3) Thermal Transfer Garment Label Printers. 3.1.1.2 Refurbished or remanufactured equipment will not be accepted and will lead to Vendors bid being disqualified. 3.1.1.3 Vendor must provide a thermal transfer garment label printer that includes an onboard LCD screen to display text. 3.1.1.4 Vendor must provide warranty on the equipment for a minimum of two (2) years from the date of release order. 3.1.1.4.1 Warranty must include repair or replacement of equipment. 3.1.1.4.2 Vendor must provide replacement equipment within seven (7) days after failure to resolve equipment issues. 3.1.1.4.3 Replacement equipment must be received between the hours of 8:00am through 5:00pm Eastern Standard Time, Monday through Friday excluding State and Federal holidays, and weekends; Contract Item 2 – Heat Seal Label Press 3.1.2.1 Vendor must provide an estimated quantity of three (3) Heat Seal Label Press’s. 3.1.2.2 Refurbished or remanufactured equipment will not be accepted and will lead to Vendors bid being disqualified. 3.1.2.3 Vendor must provide a heat seal label press that includes the following features: 3.1.2.3.1 Digital timer that automatically counts down cycle time and notification when complete. 3.1.2.3.2 Pressure adjustment knob. 3.1.2.3.3 Temperature control. 3.1.2.4 Vendor must provide warrant on the equipment for a minimum of two (2) years from date of release order. 3.1.2.4.1 Warranty must include repair and replacement of equipment...