In general, the work consists of: elevator upgrades to three hydraulic passenger elevators. One of the 2 elevators has recently been upgraded (2016) and will receive minor work. This elevator shall receive a new 3 controller to communicate and coordinate with the two remaining passenger elevators needing upgrading. 4 The two remaining passenger elevators will be upgraded to match to the recently upgraded elevator. 5 Upgrades for the two elevators will include door operators, hydraulic power units/system replacement, car 6 top handrails, microprocessor controllers, wiring, pumps, door hardware, cab lights and fan, etc. Elevators 7 1, 2 and 3 will receive new hoist-way doors and new cab doors and coordinator hardware along with full8 height, non-contact, infrared door detector. Elevator 1 and 3 have received a new hydraulic cylinder. 9 Therefor Elevator 2 will be the only elevator needing removal/replacement of a hydraulic cylinder. The 10 three passenger elevators shall coordinate and operate as a group. Currently the Smartrise controller 11 installed in Elevator 3 does not coordinate with Elevators 1 and 2. Elevators shall be refurbished or 12 constructed sequentially, so no more than one elevator is unavailable for use at any given time. No work 13 may begin until all equipment is on site.
