Specifications include, but are not limited to: 1. Contractor shall perform the following Work: a. Routine bearing and motor analysis, maintenance and repair related services (the “Work”) upon request and Emergency Work on a twenty-four (24) hours per day, three hundred and sixty-five (365) days per year basis. b. Provide all labor, tools, parts, supplies and equipment to perform Work. c. Technicians must be within one (1) hour of travel time to the Work site. 2. The bearing and motor analysis, maintenance and repair Work shall be provided in such a manner to: a. Maintain the bearings and motors of Heating, Ventilation, and Air Conditioning (HVAC) equipment in continuous top operating condition. b. Ensure optimum performance and maximum conservation of energy. 3. Certified Technician: a. The Work shall be provided only by Certified Technicians with working knowledge of bearing analysis, maintenance and repair, utilizing only parts, materials, test equipment, personal protective equipment (PPE), tools and techniques in conformity with the bearing and motor manufacturers’ specifications and recommendations. b. A Certified Technician is one who: i. Has at least one to two years of maintenance/repair experience with bearings and motors. ii. Has been trained and certified by one or more of the manufacturers used by the County within their buildings. iii. Wears uniforms and name tag identification at all times while on the Work site. 1. The minimum requirement of a uniform shall be a shirt with the Contractor’s name. 2. The Contractor and/or County supplied ID badges shall also be worn and displayed at all times.
