Specifications include, but are not limited to: Full Bumper Replacement: A full front bumper replacement shall be supplied. The front bumper shall be manufactured with 1 ¼” square tubing with the 90 degree corners on the square tubing to give the grille guard unmatched strength & durability. The body of the front bumper shall be constructed from 1/8” black gloss tread plate and shall mount to the apparatus frame using a combination 3/8” and ½” steel plate. The front bumper shall have an integrated speaker mount, winch receiver mount. Mud Flaps: Mud flaps shall be provided behind each rear wheel. Chassis Fuel Fill: There shall be a fuel fill provided in a recessed area on the rear of the truck. Chassis DEF Tank Fill: There shall be a DEF (Diesel Exhaust Fluid) fill provided in an accessible location on the rescue body, if necessary Cab Console: A custom electrical console and enclosure shall be provided to house cab mounted electrical switching devices and equipment. The console shall be located between the driver’s and the officer’s seating up to and under the dash. The console shall have vent holes with a grill insert on each side to allow for ventilation. The console shall have two (2) armrests, dual USB and 12v Hot spot outlets. The front 12” shall be angled up 30%
