Specifications include, but are not limited to: Gross Vehicle Weight of 44,000 lbs., a cab-to-axle dimension of 168 in. and a minimum of 1,500,000 RBM frame rating and 76 in. after frame. Top mount operator controls; The cab should have be 2 door standard cab, gray interior color, driver's seat air suspension high back, dual occupant front passenger seat, air conditioning including integral hearing/defroster, intermittent windshield wipers with washers, dual sun visor, driver and passenger outside fold-back rearview mirrors including convex mirrors, Am/FM radio, dual electric horns and single trumpet air horn, steel front bumper, 2 front tow hooks; PEDESTAL ASSEMBLY: Constructed of high strength steel, providing 2:1 safety factor; All hydraulic hoses located at the operator position must be enclosed in the pedestal base. Access provided by an easily steel cover. Boom Pivot shall be mounted to the pedestal by means of a slewing ring/bearing that has a minimum capacity of 513,000 lbs. static load 186,000 ft.-lbs. moment. Slewing ring shall be 3½ thick and have an O.D. of 25¾. Boom Pivot shall be constructed with a 9" O.D. safety retaining tube. Boom Pivot Safety Retaining Tube shall be a minimum of 12" long and confine all hoses which pass though the pedestal/boom pivot assembly. Boom rotation of 270 degrees minimum with mechanical stops for safety. Stops must be welded into machined recesses to ensure non-movement. Pedestal stop must have a minimum of three (3) square inches and have a nylon contact with pivot stops and a minimum width of five (5) inches.
