Specifications include, but are not limited to: 1. Locate and mark irrigation heads. 2. Remove and properly dispose of all existing sod and vegetation in the infield, outfield and other areas within the fenced playing area. Approximately 145,000 sq feet. 3. Install and level with 1,200 cubic yards of topsoil where there are low spots and depressions to correct grade. 4. Provide, install and laser grade infield clay mix (60% Sand, 40% Clay) (approximately 7,000 sq feet) to support positive drainage and runoff of field at .5-1% slope pitched towards the outfield. Clay shall be free from debris including small rocks, preferred color is red. 5. Install approximately 145,000 sq feet of blue grass fescue mix sod. County utilizes a cool grass blend mixture a. 49.05% Kentucky Blue Grass 85% Germination; 24.61 % Creeping Red Fescue 85% Germination; 24.50% Perennial Ryegrass 90% Germination; 1.64% Inert Matter; .15% Crop Seed; .05% Weed; substantially equivalent products to those designated will be considered for award; the County reserves the right to obtain additional information from the bidder regarding technical and performance specifications of suggested alternates and final right to determination of equivalency shall be determined by the County. 6. Rebuild pitcher's mound, including demolition of existing mound, bring in new mound pack clay, surface clay bricks, and topped with conditioner. 7. Re-set and install new base anchors, home plate, and pitcher’s rubber to high school baseball standards at correct grade. 8. Re-set irrigation heads to proper height and test the irrigation system to ensure proper coverage of the field, replace any heads which cannot be salvaged with Hunter I-40 sprinkler heads or substantially equivalent product...
