Vendor shall provide one new Stainless Steel Cooling Tower and pump: Provide one new Cooling Tower equal to EVAPCO Model AT14-2G6 induced draft counterflow cooling Tower! Tower water Basin shall be constructed of 304 welded Stainless Steel. All upper body and structural, Fan Shaft shall be constructed of 304 Stainless Steel Tower Shall have (1) 3 kw stainless steel Heater Final selection of manufacture tower shall be by owner approval. Motor shall be 208v three Phase. Tower shall have variable speed drive in weatherproof Stainless-Steel enclosure. Tower shall be single Cell 900 MBH cooling capacity. Tower shall have wet bulb 81deg F. Existing design requires: EWT 97 deg, LWT 85 deg, 150 GPM flow, Inlet pressure drop 3.3 Psi. PUMP Specification: Pump shall be equal too Bell& Gossett / e1510. 5Hp /1800 RPM / 73% efficiency /1800 Rpm / Capacity GPM 150 /Head (ft) 65 / NPSHR 4.5 ft Variable Frequency Drive shall be included in NEMA 4X enclosure.