Specifications include, but are not limited to: Eaton 620 series model REPTO mounted hydraulic pump. a) Pressure flow compensated variable displacement piston pump (load sensing). b) Clockwise rotation shaft end of pump. c) Shaft 1.25” diameter keyed. d) SAE C 4 bolt mounting flange. e) Displacement shall be minimum 98cc continuously rated @ 280 bar (4060 psi) 6.0 CID/REV. f) Porting shall be as follows: Shall be side ported. 2) Inlet shall be 2.5” split flange 4-bolt. 3) Pressure outlet shall be1” split flange 4-bolt. 4) Load sense 7/16"-20 UNF-2b straight thread O-ring. 5) Case drain 1.3125" 12-UNF-2b straight thread O-ring. g) Overall case length shall not exceed 11.5 inches. h) Pump load sensor shall be preset at 400 psi. High pressure shall be preset at 2,000 psi. J) LUBRICATION AND WEAR THE PUMP SHALL FEATURE A SADDLE TYPE SWASH PLATE WITH STEEL BACKED POLYMER BEARINGS. THE SWASH PLATE SHALL FEATURE A PRESSURE LUBRICATION PASSAGE TO REDUCE WEAR AND FURTHER SUPPORT INTERNAL LOADS.