Specifications include, but are not limited to: • 1 ea Hobart Model No. AM16VLT-BAS-4 Ventless Dishwashing Machine, tall chamber (27”), door type, energy recovery, high temp sanitizing, 480/60/3, internal condensing system, 40 racks/hour, straight-thru or corner installation, user-friendly smart touchscreen controls, Wi-Fi connectivity with SmartConnect app, Sens-A-Temp booster, electric tank heat, Xshaped wash arms, scrap screen and basket, door actuated start, door lock, stainless steel tank, tank shelf chambe, trim panels, fram & fram & feet, cULus, NSF, ENERGY STAR. Factory Startup – Free for installations within 100 miles of a Hobart Service Office during normal business hours with appropriate notice; installation beyond 100 miles will be quoted by Service. • 1ea Oversized unite with crated shipping dimensions greater or equal to 72” in length and/or 90” in height. If delivery is toa facility without a standard height dock, additional shipping charges will apply depending on the service requested. Consult Factory. • Splash shield for corner installs required • 1ea INSTALL BY HOBART o INSTALL RECEIVE NEW DISH MACHINE, DELIVER, SET IN PLACE, HOOK UP WITHIN 5’ OF OWNER PROVIDED UTILITIES AND START UP • 1 DISH TABLES RR SERVICE MODEL NO. CUSTOM MODIFY EXISTING CLEAN & SOILED DISHTABLES/MOFIFY EXISTING VEG PREP AREA • 1ea VEG PREP AREA CUT OUT EXISTING DISPOSER SECTION ANDMOVE RIGHT END TO THE LEFT AND REWELD TO THE NEXT TO PREP SINK. WILL REMOVE APPROX 36’ OF TABLE. REMOVE EXISTING GAVANISED LEGS AND SHELVES, REPLACE WITH NEW S/S LEGS AND SHELF • 1ea MODIFIY THREE COMP SINK/NEW DISH AREA CUT OUT EXISTING 3 TUB SINK AND MOVE TO THE LEFT END, MOVE SECTION OF TABLE TO RIGHT AND MODIFY TO FIT NEW DISWASHER. RIGHT WALL, CUT LEFT END OF EXISTING TABLE TO FIT NEW CORNER DISH WASHER. REPLACE GAVANISED LEGS AND SHELVES WITH NEW S/S LEGS AND SHELVES ON BOTH TABLES, DISPOSAL IS USABLE IF YOU WANT TO CONTINUE TO USE OR CAN BE REMOVED AND HOLE PATCHED.