Specifications include, but are not limited to: INSTALLATION OF AIR CONDITIONERS: A. Install units where shown, in accordance with equipment manufacturer's written instructions and recognized industry practices, to insure that units comply with requirements and serve intended purposes. B. Coordinate with other work, including structural, ductwork, piping and electrical work, as necessary to interface installation of units with other work. Control wiring and devices for complete, operable systems shall be provided and installed under the Mechanical specifications. Wiring shall be installed in conduit provided and installed under the Electrical specifications. C. Piping: Condensate lines shall be installed with traps and vents in each line. Open ends of lines and connection fittings of equipment shall be properly capped or plugged during construction to protect from damage and entry of dirt or foreign material. D. The mounting height of each wall mounted thermostat or temperature sensor shall comply with ADA for maximum side reach. The thermostat or sensor shall be at 48” maximum above the floor.
