Specifications include, but are not limited to: The Contractor shall: • Replace scoreboard replacements in the same location as existing scoreboards. • Remove and dispose of old scoreboards. • Provide and install new poles. • Re-wire from existing electrical feed. • Complete all installations by July 31, 2024. BASEBALL SCOREBAORD Electro-Mech Model LX1780 • Cabinet requirements: double cabinet with final assembled size of 36 feet wide and approximately ten (10) feet tall. • LED Display: Exterior, electronic scoreboard designed to present information pertinent to baseball including the following components: a) Guest and home scores by innings with runs up to nine (9) in each of ten (10) innings. Each of these twenty digits is 18 inches tall. b) Guest and home total runs to 99. Total runs digits are 18 inches tall. c) Guest and home total hits to 99. Total hits digits are 18 inches tall. d) Guest and home total errors to nine (9). Total errors digits are 18 inches tall. e) Batter number to ninety-nine 99. Batter digits are 24 inches tall. f) Ball count to three (3). The ball digit is 24 inches tall. g) Strike count to two (2). The strike digit is 24 inches tall. h) Out count to two (2). The out digit is 24 inches tall. i) Hit and error indicators. j) Error position to nine (9). Error position digit is 15 inches tall. k) Cabinet weight: 1100 pounds. l) Electrical requirements: 120 VAC, <10 amps.
