Specifications include, but are not limited to: Electromechanical Dual Column, Table-mounted, 50kN Test Machine - Minimum spacing between columns is 15”; Minimum travel distance is 46”; Maximum speed to exceed: 19 ipm; Both Tension and Compression modes; Load Cell w/ minimum Static rating of 50 kN and Fatigue rating of 25 kN; Computer-based control electronics with closed-loop control, data acquisition and user-friendly testing software (Computer and monitor supplied by MTSU); A set of tensile wedge grips and jaws rated at 50 kN and up to 120 degrees C testing under environmental conditions; A set of Tensile Grips and inserts for threaded samples – rated at 50 kN; A set of hardened steel, compression platens; Remote installation and commissioning service; Must be delivered on-site by June 15th, 2024
