Specifications include, but are not limited to: Tommy Gate G2-60-1342-TP27 GENERAL REQUIREMENTS 1. Rated lift capacity, 1300-lbs. 2. Lift gate must replace standard pickup tailgate without modification and be suitable for moving from one truck make to another without modification. 3. Top of gate must not extend above the pickup box sides. 4. Overall weight of lift must not exceed 438-lbs. 5. One-piece steel platform must be approximately 27-inches deep by 55-inches wide with 42-inches of travel. 6. Lift gate must be of a parallel arm design with dual hydraulic cylinder drive system lifting the platform from both sides. 7. Lift must be (12-volt DC) electric over hydraulic with pressure relief to prevent overloading and have a cylinder mounted flow control for safety. 8. Control must be curbside mounted and weather resistant with automatic return-to-neutral operation. 9. Circuit breaker, weatherproof 150 amps with manual-reset and all wiring, power and ground cables (4 AGW) required for proper installation must be supplied. 10. Lifts must be supplied as a complete ready-to-install assembly, including all standard and requested optional equipment. 12. Back-up alarm...