Specifications include, but are not limited to: The following lists represent a high-level overview of the project tasks associated with this Bid. 2.1. This item shall consist of the construction of asphaltic pavement surfaces and conform to Section 460 of the State of Wisconsin Department of Transportation Standard Specifications for Road and Bridge Construction, 2024 Edition. Type 4MT58-28 as specified in Section 460 of the state specifications and the aggregates to be used for base, binder and surface course shall conform to the gradation requirements in Section 460. The 4MT58-28 binder course will have a nominal thickness of 2 inches. The 4MT58-28 surface course will have a nominal thickness of 2 inches to be paved in after completion of the binder course. These quantities should not be solely relied on for Bid purposes. It is the Contractor’s responsibility to thoroughly review and calculate its own quantities and square footages in order to complete this Project as outlined in this document. The Bid amount must be adequate to fulfill the intent of the entire Project.
