Specifications include, but are not limited to: ROOF ASSEMBLY, complete roofing system. Thermoplastic roofing membrane, adhered polyvinyl chloride (PVC), 80 mil., with factory applied felt backing, in 6’ X 80’ or 10’ x 80’ rolls, white exposed face color, to cover approximately 17,180 square feet of roof. Bid must include all materials to be installed over concrete. Lot is not to be delivered until request by IWL Construction Supervisor. SHEET METAL PRODUCTS FOR ROOF: To include but not limited to: Cladded sheet metal provided in 4’ X 10’ sheets, in quantities as required per plans and specifications. Fabrication of sheet metal to be completed by Inmate Ward Labor (IWL), unless otherwise stated in this IFB. (Quantity, unit price and product information of sheet metal products must be included on materials list.) ADHESIVES AND SEALANTS FOR ROOF AND WALLS: Lot is not to be delivered until request by IWL Construction Supervisor. (Quantity, unit price and product information of Adhesives and Sealants must be included on materials list.) The coverage rate for membrane adhesive shall be 100SF per gallon. The coverage for insulation adhesive must meet FM Global Property Loss Prevention Data Sheets (1-29 & 1-49) WARRANTY Manufacturer's, Standard Ten (10) Year, Full System, No Dollar Limit Warranty, (labor/material warranty), warranty shall be non-prorated. (This language supersedes specification section 07.54.19.) NOTE: Warranty will not be paid until the roof is installed and is accepted by the manufacturer’s representative. TECHNICAL ASSISTANCE, on-site inspection, testing, training and certification of IWL staff by roofing manufacturer’s representative.