Specifications include, but are not limited to: 1. MAINTENANCE SPECIFICATIONS FOR FULL PREVENTATIVE MAINTENANCE. The following specifications are for monthly or bi-monthly preventative full maintenance including callbacks during regular working hours. Upon request for quotation the agency or CPV Member will request the frequency of services and number of hours per visit to be quoted. All work must be performed by licensed technicians. A. All work is to be performed in accordance with: • American Standard Safety Code for Elevators, ANSI A17.1 andA17.2 • National Electric Code NFPA 70 • All State and local codes that govern the requirements for the work; B. Hydraulic Elevators: Contractor will regularly and systematically examine, adjust and lubricate as required, and if conditions warrant, repair or replace: pump unit, motor, dispatching equipment, selector, car, hoistway, accessory equipment, muffler and controller parts, valves, valve magnet coils, valve motors, packing, windings, rotating elements, contacts, coils, resistance for operating and motor circuits, magnet frames, hydraulic oil and all other electrical and mechanical parts except items listed below in the list of Exclusions for Hydraulic Elevator Full Maintenance: • Motor: Maintenance on the motor includes, but is not limited to motor windings, bearings, rotating elements, commutators, brushes and brush holders; • Controller Parts: Maintenance on controller parts includes, but is not limited to relays, resistors, contacts, coils, leads, transformers, timing devices and solid state components; • Dispatching Equipment: Maintenance on dispatching equipment includes, but is not limited to relays, resistors, contacts, coils, leads, transformers, timing devices and solid state components; • Selector: including electrical or mechanical drive components, cams, contacts, relays, resistors, leads and transformers; • Car: including power door operator, door protective devices, car door hangers, car door contacts, load weighing equipment, car safety devices, car guide shoes including rollerguides. • Hoistway: including deflector sheave, secondary sheaves, buffers, governor tension assemblies, guide rails, limit switches, compensating sheave assemblies, compensating chain or cables, traveling cables, hoistway and machine room wiring, hoistway door interlocks, hoistway door hangers and gibs and auxiliary closer; • Accessory Equipment: including all accessory equipment...
