Specifications include, but are not limited to: 3/8" x 1 1/2" x 48" Lath (DOT stock #012-105400) 50/bundle - Lath shall be cut with one end square and one end cut to a pointed “V”. The degree of “V” is to be cut 3" with a ± ¼”. The lath shall have nominal dimensions of 3/8" x 1 ½" x 48". They shall conform to the #1 grade dense structural select requirements for the respective species of the following current commercial grading rules and shall be produced from these species. Lath shall be well-seasoned pine or spruce, or other species approved on the basis of similar color, texture, and strength. The wood shall be dried to a moisture content of 12 percent or less. Lath shall present a reasonably clean, light-colored, smooth, surface suitable for marking with lumber crayon & or permanent marker on both sides. 50 LATHS PER BUNDLE, DOUBLE BANDED WITH NYLON OR STEEL BANDING. Quantity: 144
