Camera Specifications-the cameras should include all listed below but not be limited to: 4.1.2.1. The video detection cameras shall include all necessary installation equipment, including but not limited to risers, communication managers, wiring, and pole attachments. 4.1.2.2. The video detection system shall include a video sensor that integrates a high-definition (HD) camera with an embedded processor for analyzing the video and performing detection. 4.1.2.3. The camera shall be a color CMOS imaging array. 4.1.2.4. The camera shall have HD resolution of at least 720p (1280x720 pixels). 4.1.2.5. The camera shall have direct, real-time iris and shutter speed control by the integrated processor. 4.1.2.6. The processor shall support H.264 video compression for streaming output. 4.1.2.7. The faceplate of the enclosure shall be glass and shall have hydrophilic coating on the exterior surface to reduce debris accumulation and maintenance. 4.1.2.8. An adjustable aluminum visor shall shield the faceplate from the sun and extraneous light sources. 4.1.2.9. An integral aiming sight shall assist in aiming the camera for the detection objectives. 4.1.2.10. A removable rear cap and cable strain relief shall seal the power connection and be tethered to the enclosure and fastened to the body of the video sensor with a single, captive bolt.
