Specifications include, but are not limited to: 3. MECHANICAL DATA A. Impeller – 197MM Cast B. Casing Wear rings - Stainless steel C. Capable of passing solids up to 4 ” D. Discharge size 4” Std. X bolt flange - Compatible with ABS Sulzer pump elbow and rail system. E. Power cable - Dia. 0.82 Length 60FT F. Control Cable - Dia. 0.82 Length 60FT 4. MOTOR DATA A. HP - 27 B. RPM - 3530 C. 3 Phase, 208 Volt, 60 HZ D. Insulation class F E. Filling medium - Air F. Thermal Trip - 140 Deg C + -5 Deg C G. Seal Protection - Sealminder or equal with documentation H. FLA 73.4 @ 208V 3 Phase 5. HYDRAULIC DATA A. Actual flow - Determine by system head B. Design flow - 128 GPM @ 203’ TDH C. Shut off head - 250’ D. Test requirements - Field Start up E. Static Head - 149’ 6. SPARE PARTS The following items shall be included and submitted with bids. A. QTY 1 - Seal kit with upper and lower Seals and O-rings B. QTY 1 - S.S power cable cord Grips size range.750” to .870” C. QTY 1 - S.S Control Cord Grips size range .460” to .560” 7. WARRANTY A. Pump - Lump sum bid totals shall include a minimum five year prorated warranty on the pump and meet factory warranty requirements. B. Motor - Lump sum bid totals shall include a minimum five year non-prorated warranty on the motor and meet factory requirements.
