Specifications include, but are not limited to: 1.1. Chassis 1.1.1. GVWR: 66,000 lbs. 1.1.2. Frame 1.1.2.1. Frame Rails ‐ Heat Treated Alloy Steel (120,000 PSI Yield) 1.1.2.2. 3,200,000 RBM, per rail ‐ Bidder should list section modulus and yield strength below Section Modulus: Yield Strength: Comply: ____Yes ____No 1.2. Cab & Axle Positions 1.2.1. Front axle: For the purposes of this solicitation, set‐forward‐axle (SFA) is considered equal to set‐back‐axle (SBA); however, SBA is the preferred option 1.2.2. Cab to axle (CA): 198.5” clear* 1.2.3. Center of axle to end of frame (AF): 96” * 1.2.3.1. *Values given here are minimums. Truck vendor and body manufacturer/upfitter shall coordinate in selecting a cab to axle dimension that works with the specified body and ensures the wheel well is aligned with the center of the axle. The required AF must be achieved with factory frame rails. Frame extensions to meet the required AF are not allowed. The AF must be sufficient to allow support of the full length of the body. 1.2.4. Must satisfy sewer cleaner requirements Comply: ____Yes ____No 1.3. Cab 1.3.1. Aluminum conventional cab with fully padded high quality interior 1.3.2. Tinted safety glass 1.3.3. Full width exterior cab mounted sun shade with integral clearance lights 1.3.4. Cab entry handles, driver & passenger side 1.3.5. Outside mirrors, driver & passenger side 1.3.5.1. Power adjustable 1.3.5.2. 90 sq. in. minimum 1.3.5.3. Heated with integrated turn signals 1.3.5.4. Two (2) adjustable spot mirrors, one (1) per outside mirror 1.3.6. Two (2) roof mounted air horns & one (1) standard electric horn 1.3.7. Air ride: driver and passenger seat, cab suspension 1.3.8. High‐back style seats with arm rests mounted on seats (both driver and passenger) 1.3.9. Manufacturer’s highest‐level sound insulation package 1.3.10. Wing dash, if available 1.3.11. Gauge package including the following gauges: 1.3.11.1. Air cleaner restriction 1.3.11.2. Coolant temperature 1.3.11.3. DEF 1.3.11.4. Fuel 1.3.11.5. Oil pressure 1.3.11.6. Primary and secondary air pressure 1.3.11.7. Speedometer 1.3.11.8. Tachometer 1.3.11.9. Voltmeter 1.3.11.10. Gear indicator 1.3.11.11. Odometer 1.3.11.12. Total engine hours 1.3.11.13. Trip hours 1.3.11.14. Trip odometer 1.3.11.15. Auto transmission oil temperature 1.3.11.16. Engine oil temperature 1.3.12. Dual sun visors 1.3.13. Two (2) cup holders, integral to dash 1.3.14. 3‐point seat belt for each seat. All seat belt webbing must be manufacturer’s high visibility color (Orange, Red, Green, or Yellow). 1.3.15. Climate control, including air conditioning, heater, & defroster 1.3.16. Power windows & power door locks 1.3.17. Tilting and telescoping steering wheel
