Specifications include, but are not limited to: CLEANER For cleaning of impurities from free flowing granular products. Designed to aspirate, scalp out large material, sift out small material and/or grade product. Roll feeder with a ½ HP, 1,750 RPM variable speed smart motor Two pass aspiration system Control panel with adjustment settings Door design for easy access to screen rows. Door is designed with a threaded handle and is also lined with replaceable metal for abrasive products. Machine designed to accept interchangeable screens suitable for different seeds and conditions “Easy” clean out features Cull and good product discharge Variable speed tandem bottom air fans Machine dimensions not to exceed: 6’ L x 4’ W x 8’ H One Operating/Safety Manual Manufacturer’s warranty of 18 months BRUSH MACHINE • Feeding tray • One‐section exchangeable mantle • Rotating shaft with two internally adjustable brushes or steel beaters • Manually adjustable brushing degree • Inspection window • Start/Stop Switch • Drive motor .075 kW with frequency converter • Collecting drawers for prime product and removed product • Cover with spout for connection to aspiration • Inlet with vibratory feeder. GRAVITY SEPARATOR For sorting and separating granular products (grains, cereals, oil seeds, fine seeds, industrial products, etc.) having different specific weight. Accomplished by means of positive air combined with mechanical vibration of the deck. • Inlet hopper and vibratory feeder with speed control • Deck with more than 1.5 sq. ft. of area • Separate rock trap that is adjustable based on product needs • Deck equipped with adjustable flaps that allow the retention time on the table to be increased or decreased based on separation needs • Deck adjustable for both side‐tilt and end‐tilt inclination • Interchangeable mesh covers to accommodate different seed product needs • Discharge hopper for heavy / light / mid product • Adjustable deck vibration and fan speeds • Pressure‐air type unit with segmented fan compartment. • .5 HP, 1,200 RPM motor for eccentric shake and 2 HP, 1,750 RPM motor for fan. • Machine dimensions: 3’8” L x 2’11” W x 3’7” H each unit. • Manufacturer’s warranty of 24 months from factory ship date or 5,000 operating hours
