12,000 lb. Compact Track Loader- ENGINE: 1. Four cylinder, turbocharged diesel engine ___ ___ _____________ 2. Engine to be certified to EPA Tier FT4?EU Stage IV non-road emission standards ___ ___ _____________ 3. Engine displacement to be no less than 186.3 cu. In. (3.1L) ___ ___ _____________ 4. Engine net peak power (SAE J1349/ISO 9249) to be no less than 97 hp (72 kW) At 2,500 rpm ___ ___ _____________ 5. Engine gross power (ISO 14396) to be no less than 100 hp (74.6 kW) at 2500 rpm___ ___ _____________ 6. Engine shall develop at least a 39% torque rise ___ ___ _____________ 7. Engine shall have an electric transfer fuel pump with auto prime ___ ___ _____________ 8. Service interval for the engine oil and oil filter shall be a minimum of 500 hours ___ ___ _____________ 9. The engine shall have an auto tension serpentine fan cooling fan belt that Never needs adjusting ___ ___ _____________ 10. Engine air filter restriction indicators shall be displayed in the cab monitor ___ ___ _____________ 11. Engine shall be governed electronically providing precise multi-injection events That improve machine performance, fuel efficiency and improved cold starting in Extreme ambient conditions ___ ___ _____________ 12. The engine shall have automatic pre-heat and auto-shutdown provided ___ ___ _____________ 13. Engine to provide Auto idle feature to automatically reduce engine speed to idle When the machine is not in use for maximum fuel efficiency ___ ___ _____________ 14. The engine, hydrostatic-hydraulic and chain chase reservoirs shall all utilize 10W-30 oil to simplify service ___ ___ _____________ 15. Quick-pivot ROPS that allows direct access to major hydraulic components and Engine starter when the boom is in its lowered position ___ ___ _____________ 16. The fuel tank shall be no less than 30 gallons (114L) ___ ___ _____________ COOLING: 1. Hydraulically driven variable speed cooling fan to cool only on demand for fuel Economy, lower average noise levels, and less cooler clogging in high debris area___ ___ ____________ 2. Unit shall have a coolant recovery tank provided ___ ___ ____________ 3. The unit should be equipped with a tri-cool configuration that pulls fresh air
