Specifications include, but are not limited to: 1. Cab & Chassis 1.1. GVWR: 35,000 lbs. 1.2. Frame: 1,810,000 RBM (Resisting Bending Moment) - Bidder should list section modulus and yield strength below 1.3. Cab & Axle Positions 1.3.1. Front axle: For the purposes of this solicitation, set-forward-axle (SFA) is considered equal to set-back-axle (SBA); however, SBA is the preferred option 1.3.2. Cab to Axle (CA): 113”clear* 1.3.3. Center of rear axle to end of frame (AF): 36”* *Values given here are minimums. The space between cab and sweeper/vacuum unit shall not exceed 10 inches. Truck vendor and sweeper/vacuum manufacturer and/or upfitter shall coordinate in selecting a cab to axle dimension that is compatible with the required body length and ensures proper load distribution to the front and rear axles in accordance with manufacturer specifications and industry practice. The required AF must be achieved with factory frame rails. Frame extensions to meet the required AF are not allowed. The AF must be sufficient to allow support of the full length of the body. 1.4. Front Bumper 1.4.1. Full width all-steel front bumper 1.4.2. Two (2) frame mounted tow hooks, one on each frame rail 1.5. Cab 1.5.1. Conventional day cab 1.5.2. Tinted safety glass 1.5.3. Full width exterior cab mounted sun shade with integral clearance lights 1.5.4. Cab entry handles, driver & passenger side 1.5.5. Outside mirrors, driver & passenger side 1.5.5.1. Power adjustable 1.5.5.2. 90 sq. in. minimum 1.5.5.3. Heated 1.5.5.4. Two (2) adjustable spot mirrors, one (1) per outside mirror 1.5.6. Two (2) roof mounted air horns & one (1) standard electric horn 1.5.7. Air ride driver and passenger seat 1.5.8. Cab suspension 1.5.9. Manufacturer’s highest level sound insulation package 1.5.10. Gauge package including the following gauges: 1.5.10.1. Air cleaner restriction 1.5.10.2. Coolant temperature 1.5.10.3. DEF 1.5.10.4. Fuel 1.5.10.5. Oil pressure 1.5.10.6. Primary and secondary air pressure 1.5.10.7. Speedometer 1.5.10.8. Tachometer 1.5.10.9. Voltmeter 1.5.10.10. Gear indicator 1.5.10.11. Odometer 1.5.10.12. Total engine hours 1.5.10.13. Trip hours 1.5.10.14. Trip odometer 1.5.10.15. Auto transmission oil temperature 1.5.10.16. Engine oil temperature 1.5.11. Dual sun visors 1.5.12. Two (2) cup holders, integral to dash 1.5.13. 3-point seat belt for each seat. All seat belt webbing must be manufacturer’s high visibility color (Orange, Red, Green, or Yellow). 1.5.14. Climate control, including air conditioning, heater, & defroster 1.5.15. Power windows & power door locks 1.5.16. Tilting and telescoping steering wheel
