Specifications include, but are not limited to: 1. Anionic Emulsified Asphalt - AASHTO M 140 2. Cationic Emulsified Asphalt – AASHTO M 208 3. Polymer Modified Cationic Emulsified Asphalt - AASHTO M 316 with the following exceptions: 1) Use AASHTO T59 distillation method to recover residue with the following exception; Bring the temperature on the lower thermometer slowly to 350 Degrees Fahrenheit +/- 0 Degrees Fahrenheit. Maintain at this temperature for twenty (20) minutes. Complete total distillation in 60 +/- 5 minutes from the first application of heat. 2) Residue must meet either force ratio or elastic recovery requirements. 4. High Float Emulsions - Section 402 of the New Mexico Department of Transportation Standard Specifications for Highway and Bridge Construction, special provisions and supplemental specifications (current editions). 5. Polymer Modified High Float Emulsions - Section 402 of the New Mexico Department of Transportation Standard Specifications for Highway and Bridge Construction, special provisions and supplemental specifications (current editions)
