Specifications include, but are not limited to: This specification is for a new current year Peterbilt or Kenworth 80,000 lb. GVW cab chassis Pull truck. Other manufacturers will not be considered. Cab: 1. 120-inch BBC minimum, aluminum, or steel cab. 2. Air ride cab. 3. Bug screen mounted behind grill. 4. Dual air horns. Cab mounted. 5. Factory electric horns. 6. Day time running lights. 7. Mirrors: A. Exterior, remote controlled, heated. Breakaway type, 7-inches x 15-inches approx. with 7-inch large convex mirror mounted on each side of the cab. B. Convex mirror mounted at top of passenger side door pointed downward. C. Exterior: 7-inch round convex mirror mounted on each side of the hood. 8. Power windows. 9. Interior silencing package inside the cab to reduce interior decibel level to below 80 decibels. 10. Exterior sunshade across the front of the windshield at the top. 11. Two (2) rear facing external lights, one (1) mounted on each side of the truck on the rear to light up hitch area. Switch to be mounted inside the cab and clearly marked. 12. Storage console inside of cab and in driver’s door 13. Factory installed through the dash Air Conditioning 14. Solid state circuit protection and fuses. 15. Driver and passenger seat must be air ride, with vinyl. 16. Each seat is to have high visibility seat belts, high visibility orange preferred. 17. Tilt and telescopic steering column. 18. 5 lb. Fire extinguisher mounted in cab. 19. Triangle reflector kit with flares mounted in cab. 20. Factory installed AM/FM weather radio. 21. Instruments and displays: A. Speedometer. B. Tachometer. C. Fuel level. D. Oil pressure. E. Engine temp. F. Hour meter. G. Trip hours. H. Trip miles. I. Voltage. J. Axle temperature gauge for each axle. K. Primary and secondary air pressure. L. High heat warning light for transmission.
