Specifications include, but are not limited to: Create CAD drawing for the new fire alarm system. Drawings and system shall meet all local and NFPA codes. Provide and install new Notifier components on a one to one basis to replace existing devices and panels. Any extra devices that are required in order to meet code requirements shall not be included in the base bid. If extra devices are required they will be added as a change order once the device requirement is determined. All devices shall be new and current Notifier devices that are compatible with the NFW-100X panel. Install device cabling as needed. Provide and connect 120 V circuits as needed. Remove existing TECC devices and turn them over to the owner. Owner shall be responsible for patching, painting and damaged ceiling tiles directly related to the project, however contractor shall work to minimize any damage. Obtain and pay for any needed permits and work with City inspectors as needed for an approved system. Work can be performed during normal business hours Mondays through Fridays excluding County observed holidays. The building will be occupied during this project and contractor must work to minimize disruptions as much as is reasonably possible. Testing of horns or other unusually loud activities shall be performed outside of normal business hours. Contractor shall coordinate device replacement in a manner that minimizes downtime of the alarm system. Contractor shall also notify TECC monitoring company as needed throughout the project. All devices shall be installed to manufactures recommendations and specifications. Program fire alarm system as needed to accept and recognize new devices. Contractor shall test each device and the system at the completion of the project to assure all devices are working as required. Provide a one-year labor and materials warranty for project.