Specifications include, but are not limited to: 6.3 Cleaning and Disposal of Waste Material 6.3.1 The Contractor shall clean up the job site at the end of each day and at work completion. 6.3.2 All waste materials generated by the Contractor performing work under this contract will be disposed of off-site by the Contractor at the Contractor’s expense. Disposal of all materials must be in compliance with all Local, State, and Federal guidelines, regulations, and requirements. 6.3.2 No materials are permitted to be disposed of in University’s dumpsters 6.4 Dust and Fumes Protection 6.4.1 The Contractor is responsible to take all reasonable precautions to prevent dust and fumes from entering other parts of the building including but not limited to sealing off intakes and doors. If the dust mitigates to adjacent areas or other parts of the building, the service provider is responsible for cleaning those affected areas. 6.5 Quality Assurance 6.5.1 Engage an experienced staff properly trained and with sufficient experience to insure that all services provided under this contract are expeditiously and safely completed. 6.5.2 The Contractor agrees that the University Facilities Management department shall have the sole authority to determine that the work is properly done and may direct the Contractor to redo any work, at the Contractor’s expense, that is not to his satisfaction. The University may withhold partial or all payment until the work is completed to the satisfaction of the University Facilities Management department. 6.5.3 Any unforeseen issue must be reported to the University Facilities Management department immediately.