Specifications include, but are not limited to: TYPE: Standard profile type utility body, 132” length, suitable for mounting on a dual rear wheel Navistar CV515 or Freightliner M2 102 low profile chassis, with an 84” CA dimension and 6.6 Liter or 6.7 Liter diesel with Allison 2000 Series transmission with PTO opening. An acceptable make and model is as follows, all others shall be equal to, or exceed it: Knapheide 5132D54J & CR132D54J-M 1. LENGTH: Approximately 11’ long. 2. HEIGHT: Approximately 40”. 3. WIDTH: Approximately 94”, or as needed for adequate overhang/tire clearance when mounted onto one of the chassis listed above. The inside floor width shall be approximately 54”. CONSTRUCTION: The longmembers and cross sills shall be minimum 7 gauge formed or structural C-channels, installed over the Torsion Box Floor, designed to prevent damage to the body structure due to torsional twist. The shell of the body shall be constructed of minimum 14 gauge rear and front, sides and front bulkhead, with minimum 3/16” diamond plate floor.
