Specifications include, but are not limited to: Type “C” 71+ Passenger School Buses • Camera systems must come with each bus - Specs are provided at the end of the document • All engines shall have the most current EPA Emissions Standards at the time of bid for the buses. • The vendor shall supply one spare rim for each bus purchased. • General warranties are to include but will not be limited to: • Warranty shall be 3-Year/50,000 miles (starting from delivery date) of power train to include all internal engine parts, fuel system, • computer software, hardware, programming, emissions controls/hardware, and engine-driven accessories (excluding Air- • Conditioning compressors), transmission, drive-line components, front & rear axle components (except consumable brake • parts). • The starter and alternator shall have a 1-year warranty. • Seat belt assemblies shall conform to FMVSS No. 209, Seat Belt Assemblies.; Type “B” 23+ Passenger Special Education Buses • Camera systems must come with each bus - Specs are provided at the end of the document • Buses should have a 24+3 seating arrangement or closest accommodation. • All engines shall have the most current EPA Emissions Standards at the time of bid for the buses. • The vendor shall supply one spare rim for each bus purchased. • General warranties are to include but will not be limited to: • Warranty shall be 3-Year/50,000 miles (starting from delivery date) of power train to include all internal engine parts, fuel system, • computer software, hardware, programming, emissions controls/hardware, and engine-driven accessories (excluding