Specifications include, but are not limited to: The equipment requested must be new, unused, and the manufacturer’s current year production model or an unsold previous years’ model. The unit shall be complete as nationally advertised and designed for severe duty conditions. The equipment must be thoroughly inspected, serviced, and ready for use upon delivery. All work performed must meet established industry standards of quality to be acceptable. Any unacceptable work must be corrected before payment is issued. A. Chassis: 1. Less than 10,000 lbs. (GVWR) 2. 2.5” pintle hitch with safety chains 3. Large tubular fixed-length drawbar 4. Marker, blinker, and brake lights with electrical cord to the truck 5. Strobe light 6. Heavy-duty landing leg for ease of hooking and unhooking B. Chipper: 1. Minimum of 15” throat opening, with horizontal feed wheels 2. 360-degree manual crank swivel discharge with adjustable height and chip deflector 3. Reversing auto-feed system automatically stops forward feed and briefly backs material away from the drum for optimum engine performance 4. Manual reversing handle at the feeder opening (Bump Bar) C. Engine: 1. Minimum of 170HP Diesel engine 2. Enclosed engine with gauge panel and radiator fines screen 3. Block heater 4. Electronic fuel gauge D. Miscellaneous: 1. Hydraulic winch with 5,000 lb. pull capacity 2. Safety cables in the feeder opening attached to the bump bar
