Specifications include, but are not limited to: The Lancaster County School District is seeking competitive sealed bids for the purchase, delivery and installation of four (4) Outdoor Digital Signs. Four locations listed below in the Delivery/Performance Location – Specified will receive once sign each. a) Each sign shall have a minimum total sign dimensions shall be 64 3/8” H x 94 1/2” L. b) Each sign’s top portion of sign shall be the LED lighted I.D. Cabinet, 36” H x 94 1/2”L with graphics. Graphics shall include each schools name and mascot. Top portion of sign shall be internally lit. c) Lower portion of each sign shall be 28 3/8” H x 94 1/2”L with Vantage LED – Flex V Series with full color outdoor display, or approved alternate. Pixel Pitch: 16mm; Physical Matrix: 45 x 150; LEDs per Pixel: R1G1B1; Estimated Weight per Face: 214 lbs; Square Feet per Face: 18.6; Front & Rear Service Access; Color Capability: 281 trillion colors; Viewing Angle: 160 degrees horizontal; Brightness: >= 10,000 NITS; Flex module for future upgrades of display (upgrade from 20 mm RGB to 16mm, 12mm, and/or 10mm for improved resolution). d) Electrical Specifications: Default Input Voltage: 120V AC; Single Phase Input Power only; Typical load 120V – 3 amps per face; Max load 120V – 10 amps per face. e) Software: Cloud based software, accessible for programming assistance; Lifetime SM Infinity; Unlimited lifetime training for software; constant monitoring of LED sign; Easy to use applications; Capable of state & federal emergency alerts based on zip code. f) Warranty: 7 years parts & on-site labor with no deductible, or approved alternate. g) Each sign shall have fabricated aluminum skirt with internal steel tubing for mounting, 55 5/8” x 47”. Total height of sign shall be 10’ from ground unless District deems a school needs a sign lower to the ground. h) Each sign shall be Underwriters Laboratory approved & labeled and FCC compliant. i) Each sign shall be two-sided. j) Each sign shall have a dual power outlet to power the fiber to Ethernet media converter. k) Each sign shall have a built-in Gigabit Ethernet port for wired communication to the sign.
