Specifications include, but are not limited to: 1.3. Cab & Axle Positions 1.3.1. Front axle: For the purposes of this solicitation, set-forward-axle (SFA) is considered equal to set-back-axle (SBA); however, SBA is the preferred option 1.3.2. Cab to Axle (CA): 149.9"clear* 1.3.3. Center of rear axle to end of frame (AF): 82"* *Values given here are minimums. The space between cab and body shall not exceed 10 inches. Truck vendor and body manufacturer/upfitter shall coordinate in selecting a cab to axle dimension that works with the specified body and ensures proper load distribution to the front and rear axles in accordance with manufacturer specifications and industry practice. The required AF must be achieved with factory frame rails. Frame extensions to meet the required AF are not allowed. The AF must be sufficient to allow support of the full length of the body. 1.5. Cab 1.5.1. Conventional day cab 1.5.2. Tinted safety glass EQUIPMENT SPECIFICATIONS 1.5.3. Full width exterior cab mounted sun shade with integral clearance lights 1.5.4. Cab entry handles, driver & passenger side 1.5.5. Outside mirrors, driver & passenger side 1.5.5.1. Power adjustable 1.5,5.2, 90 sq. in. minimum 1.5.5.3. Heated with integrated turn signals 1.5.5.4. Two (2) adjustable spot mirrors, one (1) per outside mirror 1.6. Engine EQUIPMENT SPECIFICATIONS 1.6.1. 6.7 L, electronic diesel, turbocharged, liquid cooled, 6-cylinder inline configuration 1.6,2. 300 HP, 660 FT-LBS 1.6.3. Engine must include turbo exhaust brake 1.6.4. Emission system must include DEF 1.6.4.1. DEF tank to be located on driver's side next to fuel tank 1.6.4.2. DEF tank must have a minimum capacity of 7 gallons 1.6.5. Engine must be biodiesel compatible 1.6.6. Horizontal exhaust
