Specifications include, but are not limited to: Security Fence Approved Model – Ameristar Impasse II – Gauntlet Style or written approved equal, a spec sheet(s) shall be provide at time of bid submission. - Install approximately 368 LF of 7’ tall security - Three-rail design - 2.75” wide Pales - 11 ga rails - 12 ga I beam posts - Line post to be on 8’ centers, all posts set in concrete, minimum embed 36” - Black “Perma-Coat” finish with 15-year warranty Security Gate Approved Model – Ameristar Passport IS – Gauntlet Style or approved equal, a spec sheet(s) shall be provide at time of bid submission. - Install (1) 24 LF cantilever 7’ tall security gate - Three-rail design - Black “Perma-Coat” finish with 15-year warranty Man Gate chain link - Install (2) Single swing gates, 8' opening, 1-5/8" frame diameter, 40-weight frame, 3" O.D. gate posts, 90-degree hinges with strong arm latch. Chain Link Fence - Install approximately 914 LF of 6’ tall with galvanized chain link fence - with (3) strands of barbed wire, 12.5-gauge, 4-point barbs, max 5” o.c. - 9-gauge fabric with 2” chain link mesh - 3" WT/LG40 corner, end and pull posts. - 2" WT/LG40 weight line posts, - 1-5/8" diameter, 40-weight, top rail - 7-gauge bottom tension wire. - Line post to be on 10’ centers, all posts set in concrete - Tie in new fencing to existing chain link fence post using all new mechanical ties and new barbed wire as needed. - Selvages: Top and Bottom selvage twisted.
