Specifications include, but are not limited to: The WORK of this Contract comprises the design support, supply, and on-site support of a new Low Voltage Motor Control Center (MCC), as described in the Agreement. The OWNER will decide and the Agreement will document whether one combined MCC (Option 1) or two separate MCCs (Option 2) will be provided following the OWNER’s receipt of bids for both options. The Contract Documents provided include information for both options to enable the SUPPLIER to provide a complete bid including both options. The WORK requires the SUPPLIER to provide goods and services. The SUPPLIER shall, in general, provide the following services and equipment that, as a minimum, will be used as integral components of the OWNER’s proposed Advanced Water Treatment Demonstration Facility (Demonstration Facility): 1. Phase 1 Design a. Design support services b. Design and shop drawing submittals including resubmittals c. Design of all required equipment supports, fasteners, anchor bolts, seismic restraint system and appurtenances 2. Phase 2 Fabrication/Construction a. Construction Shop Drawings, as needed for coordination with CONTRACTOR for installation, including final/as-built fabrication drawings, final wiring diagrams, and storage and installation instructions b. Low voltage MCC(s), complete and operable as specified in Division 26 c. All components for a complete and operable system as specified in Division 26 and all other Technical Specification Divisions. 'd. Protective Coatings e. Steel frames to support equipment f. Specialized tools and maintenance equipment g. Spare parts h. Installation supervision i. Startup, training, testing, commissioning and warranty services j. Testing, cleanup and closeout k. Operations and Maintenance Manuals