Specifications include, but are not limited to: *Items 1a-1f will be purchased as POWER SOURCE ASSEMBLED --see below: The BBA-2 solar battery box must have an integrated back panel. The Morningstar Prostar MPPT 25 Amp controller and electrical breakers must be secured to the back panel by the contractor. The appropriate American wire gauge (AWG) electrical wire must be used to connect the charge controller to the breakers and electrical relays that will be connected to the associated solar panel, batteries, and weather station upon final installation. THE STATE WILL PERFORM THE FINAL INSTALLATION. Electrical assembly size must meet solar system requirements (electrical breakers and wiring required to connect solar panel, charge controller, and batteries into one solar power system). Note, see Exhibit C, Supplement 1 for Power Source Assembly components. Unit Price in cell D12 should reflect cost of 1a-1f assembled as directed, such that cells D13-18 should be blank. Ameresco Solar Panel-395WATT-24V-C1D2 ; Solar Panel Mount-Side of pole-395J-V ; Enclosure-2 battery-pole mount-back plate ; Morningstar Prostar MPPT 25 Amp Controller ; 110Ah 12V Battery ; DEKA Solar; 12 volt/108 Amp Hour Gel Cell Battery ; Apogee Silicon-Cell Heated pyranometer...
