Specifications include, but are not limited to: BITUMINOUS MILL AND FILL a. Mill 2.5” deep along curb line to 0” at 8’ out using a 8’ milling machine. Vacuum milled area. The City will have 4 dump trucks to haul away the millings. b. Tac and pave scratch coat 1” thick. c. Pave 2nd lift 2” thick. d. Both rubber tired and smooth drum rollers must be used for proper compaction. e. The street will have 1 lane open during the milling operations. f. Public Works Personnel will assist with traffic control. g. Cost of headers will be incidental. NOTE: Bituminous wedging will be required on German St. along new curb and gutter this will be paid by “TON”. RESET STRUCTURES a. Remove and salvage castings to City Public Works yard. b. Pave street. c. Cut pavement and set new castings to grade. d. Pour concrete collar around casting. e. Provide traffic control (must meet MUTCD specifications) CONCRETE CURB & GUTTER PATCHING a. Full depth saw cuts b. Concrete removal and disposal in locations provided by contractor c. Subgrade excavation and disposal and grading d. F&I 4” compacted aggregate base e. F&I #5 epoxy coated rebar 18” long, 12” on center at tie-in to existing. f. Pour new curb & gutter to match profile of existing curb & gutter with 4000 psi concrete g. Seal with curing compound h. Cleanup all debris i. Provide traffic control (must meet MUTCD specifications) NOTE: On the German St. curb and gutter replace 129’ sunken curb and gutter on the north side of the street. Transfer the south side curb and gutter grades to the north side when forming up the curb and gutter.
