Specifications include, but are not limited to: Work Surfaces Industrial grade minimum 1-1/8” particleboard meets or exceeds M-2 standards in accordance with the current ANSI 208.1 standard. Optional high-pressure decorative laminates should meet or exceed current NEMA LD3-2000-PF30 high –pressure laminate performance standards, under-surface sealed with resoback. Edge banded four sides with a minimum 2 mm PVC and minimum 2 mm radius trim on all sides and corners. End Panels Industrial grade minimum 1” particleboard meets or exceeds current M-2 standards in accordance with current ANSI 208.1 standards. The decorative surface paper to be a minimum 80 gram / 50 lb. basis weight (pre melamine saturation), thermally fused to substrate two sides. Laminate meets or exceeds current NEMA LD3-2000-GP20 standards. Edge banded minimum three sides with minimum 2 mm PVC, and minimum 2 mm radius trim on all sides and corners. Standard minimum 1-1/8” nickel-plated leveling glides with black nylon glide bottom, minimum 5/16” x 1” threaded stem fitted into metal insert. Modesty Panels Industrial grade 16 gauge metal or minimum 5/8” particleboard meets or exceeds current M-2 standards in accordance with current ANSI 208.1 standards. The decorative surface paper to be a minimum 80 gram / 50 lb. basis weight (pre-melamine saturation), thermally fused to substrate two sides. Laminate meets or exceeds current NEMA LD3-2000-GP20. Edge banded all sides with minimum 0.5 mm PVC. Modesty Shelf/Compartments Industrial grade, minimum ¾” particleboard meets or exceeds current M-2 standards in accordance with ANSI 208.1 standards. The decorative surface paper to be minimum 80 gram / 50 lb. basis weight (premelamine saturation), thermally fused to substrate two sides. Laminate meets or exceeds current NEMA LD3-2000-GP20. Contour design component edge banded user side with minimum 2 mm radius trim long edges. The compartment should contain a wire management raceway, power strip, open or grommet ends for ease with daisy-chaining connections, cutout for CPU compartment and grommet holes for other wiring. Modesty cover to have an optional lock available. All casework / components produced utilizing 32 mm wood working technology, tolerance +/- 0.4 mm. Metal-to-metal cam lock assembly using zinc cam to minifix connecting bolts. Workstations The workstations are to include the following as standard: Power strip – UL/cUL listed cord set non-surge protected with lighted circuit breaker switch located in storage area, including six 110V outlets, and a minimum 6’ grounded power cord. Keyboard tray – minimum 34” wide textured black thermoformed keyboard drawer, featuring comfort radius edges and five positive outward stop locations. Outward locking tabs prevent accidental removal of the keyboard drawer. Modesty panel includes removable panel for easy access to wire management, hardware and power strip on the approach (non-user) side of workstation. Wire management raceway – raceway extrusion mounted horizontally between end panel grommets. Grommets – Single grommet located on the top right corner of work surface and one located on each end panel, removable grommet covers included. Grommets to be interchangeable with data port.