Specifications include, but are not limited to: BED SPECIFICATIONS Length of Bed to be 9-1/2 ft Deck of bed to be 96” wide plus stake pockets and rub rails on outside making overall width to be 86” Total. 1/8” Smooth plate Steel Floor Stake Pockets and Rub Rails on Sides Only 5” Structural Channel Long Sills 2” Structural Channel Cross Sills on 12” Centers 2” Tubular or Round Pipe Bulkhead not to exceed over 3” above Cab. Mesh Screen Window Protector, Tapered to Match Cab. Recessed Fuel Fill Cups ICC Recessed Marker Lights Rubber Mud Flaps & Mud Flap Brackets Painted Gloss Black Rubber Mounted LED Stop/Taillights & Reverse Lights Bed to include qty of (2) Weather Guard model # 530-5-02 under the bed toolboxes mounted to truck frame in front of rear wheels. Bed to include 8” Removable Steel Side Boards Reinforced Frame Mounted Class V Receiver Tube Style Rear Hitch with Safety Chain D-Rings 2” DOT Conspicuity tape red/white installed on rub rails of bed. BED HOIST SPECIFICATIONS Hoist to be Electric over Hydraulic Powered. Hoist to be Power Up and Power Down. Hoist to be 8-ton Capacity. Full Length Sub-frame. Body Safety Prop. STROBE LIGHTS Whelen Model #MJYAAAP With Four Optional JDCA Inboard Corner Modules Permanently Mounted to Top of Cab Shield with Light Wired in with On/Off Switch Mounted Inside Cab. BACK UP CAMERA Factory Camera to be Installed on rear of Bed:
